Why perform WEEE certification while performing electronic engineering ?
To be able to use the device, the user has to interact with it. Most of time user will interact via user interface.
What solution we provide for electronic product UL certification during product development of electronic or IT product ?
How do we perform UL electronic product certification ?
What benefit do you get when contracting with us for electronic product UL certification.
Why perform UL certification while performing electronic engineering ?
When engaging in electronic or electrical appliance devices the safety is always a concern. The USA take it seriously and recommend to certify according to UL standard for products who potentially can be dangerous for human being. This is particularly targetting product with high power who can potentially provok electric shock and start fire.
UL is usually a non compulsory requirement but it helps to give confidence to the market about your product safety, so this is a marketing tool and advantage.
What solution we provide for electronic product UL certification during product development of electronic or IT product ?
Base on your product classification we have capability to assist you in deciding wether or not your product should be UL certified or not. If there is a real need for it we will let you know in advanced what need to be done to make sure your product can pass the test.
How do we perform UL electronic product certification ?
We work hand to hand with accredited partner capable to test and certify your products againt UL standard. We coordinate between the different stakeholders involved in the project to make sure the logistic is ensured properly and that testing and ceritfication can be effectively made properly and on time.
What benefit do you get when contracting with us for electronic product UL certification.
We will advice you about your product and what you shoudl do regarding this certification which the directive are not always clear. We will also prepare everything to make sure you can pass the test and get ceritifed properly and quickly.
We will take in consideration this requirement during the engineering phase.
Why perform electronic FCC certification while performing electronic engineering ?
If you wish to sell your product in the USA, you will need to complain with law and regulations of this territory. FCC is specifically targeting electronic product in the USA.
Importers who wish to sell telecom, licensed RF, and low powered transmitters in the United States must have their products tested by FCC listed or accredited lab and certified by the FCC for EMC/Telecom compliance.
Importing electronic product without getting them certified may make your business at risk and push the cusom border to block your container or your shipment. For this reason, getting your electronics product being compliant with FCC regulation is essential.
What solution we provide for electronic product fcc certification during product development of electronic or IT product ?
We provide FCC testing and certification services that will help get your products to market faster, enabling greater sales and revenue potential overall.
How do we perform fcc electronic product certification ?
We work in partnership with accredited laboratory being fully licencied to perform FCC testing and certification for your product
What benefit do you get when contracting with us for electronic product certification.
Not only you will save cost working with us because we will handle the full process directly in Asia , but you will also save time because we will handle all the coordination, the logistic, and we will take in consideration of those technical constraints during the engineering and manufacturing phase.
Why performing CE electronic product certification while performing electronic engineering ?
To be able to sell electronic product on the european market you need to comply with law and regulation of this market. On this base your product has to be tested and certified. If you don't comply with law regulation you take the risk to get your product being blocked by the custom at destination. In case your product is proven to be no compliant and potential become harmfull for customer then you wil lbe directly responsible and no insurance will cover you for product liability
What solution we provide for electronic product certification during product development of electronic or IT product ?
We work closely with accredited laboratory and accredited body to perform testing and certification for electronic product so that to make sure your product is compliant with european market. Not only they test the product but we also gather all the necessary information to make sure the test can be passed.
How do we perform electronic product certification ?
Jointly working with accredited laboratory we will handle sample delivery at the lab and will communicate directly with the laboratory to perform test and certification.
What benefit do you get when contracting with us for electronic product certification.
Not only you benefit getting access to local lab at better cost, but you also save time because we handle testing, lab management, certification directly at the source. Not only you will save your time, you will also avoid risk of failure of your test.
We work closely with laboratory during the engineering phase of your product to make sure the product can be compliant with the test. We integrate the market and testing constraints at the earliest stage of the developpement of your prouct.
Why perform electronic rohs certification while performing electronic engineering ?
In most of european country Rohs certification is required to enter product into the market. Rohs directive clearly stipulate prohibition of certains susbtances in products and especially electronic product. Those susbstances are mostly lead, mercury and cadmium
(RoHS) is a set of EU regulations that implements EU Directive 2002/95 that restricts the use of hazardous substances in electrical and electronic equipment. This directive bans placing on the EU market, any product having an electrical/electronic component containing more than thresholds set for lead, cadmium, mercury, hexavalent chromium, polybrominated biphenyl (PBB) and polybrominated diphenyl ether (PBDE) flame retardants.
What solution we provide for rohs certification during product development of electronic or IT product ?
Most of non-compliance related to Rohs regulation are due to wrong use of components who are themselves not Rohs compliant. Often, a loss of supply chain control and management related to component compromise the certifcation of product against Rohs. Not only we strictly track and follow the supply chain to avoid the use of uncompliant components but we work also with testing company to make sure products are compliants.
How do we perform rohs certification ?
We work closely with accredited laboratory specialized in testing and certifiying product against Rohs before the mass production but also sometimes during the product by picking samples on the prouction line to make sure the rights components are used.
What benefit do you get when contracting with us for rohs certification.
Not only we make sure your product is compliants with Rohs directive, but we also take this point in consideration during the Bill of Material establishment. You will benefit our expertise and the best cost to test and certify your product against Rohs directive.
Why perform electronic product certification while performing electronic engineering ?
To be able to use the device, the user has to interact with it. Most of time user will interact via user interface.
What solution we provide for electronic product certification during product development of electronic or IT product ?
How do we perform electronic product certification ?
What benefit do you get when contracting with us for electronic product certification.
Why perform electronic testing while performing electronic engineering ?
To be able to use the device, the user has to interact with it. Most of time user will interact via user interface.
What solution we provide for electronic testing during product development of electronic or IT product ?
How do we perform electronic testing ?
What benefit do you get when contracting with us for electronic testing
Why perform software engineering and user interface coding while performing electronic engineering ?
To be able to use the device, the user has to interact with it. Most of time user will interact via user interface.
What solution we provide for software engineering and user interface coding during product development of electronic or IT product ?
User interface can be implemented on different platform : Windows of course, but also iOs, Android, Linux etc...
How do we perform user interface coding and software engineering ?
The firmware engineer will be mostly in charge of:
- Developing and coding firmware in order to achieve the product functionality and specification.
- Optimizing the code so that the IC can run the program more efficiently: run faster, with less instruction and consume less power
- Adapt and optimize user interface
What benefit do you get when contracting with us for software engineering and user interface coding
One of the main advantage of making us develop your firmware is you can control your product 100% without being dependant of your manufacturer for any customization you want to do on your product.
We work closely with IC manufacturer in China and Taiwan so we get local support and we have fast response. We can then design and customize firmware quickly and efficiently (which most of the Chinese manufacturer can do as they sub-contract firmware coding to other companies)
It worth mentioning that if duplicate a PCBA is easily doable by reverse engineering, doing so with a compiled firmware without having the source is much more challenging. On this base duplicate a product without having access the firmware is difficult. For this reason, being the only one to have access to it is strategically an advantage.
Why to perform special material part prototype assembly while electronic product development in China
Sometimes your product will not include only plastic, metal and electronic. In some case you may need to assembly other material parts such as leather, rubber, carton, glass, wood, any precious metal or any other material etc...
Every material got his own way to be transformed and manufactured and it makes every case to be special.
Our solution to perform special material prototype in China
Depending on the material which we need to prototype the part, we will assess every transformer, by understanding their transformation process, we will appropriate the knowledge about what is critical and what is not, after we get fully capable to advice, support and follow up those transformers.
We have access a wide network of ressources for performing special part prototyping and we work in tandem with those partners hand to hand to ensure a quick turnaround and a perfect processing of the part.
What do we do during special part prototyping
Our Mechanical Engineer will supervise rapid prototyping for those special material parts by coordinating and piloting our rapid prootyper partners, and will ensure quality control on those parts.
Your benefit using our special material part prototyping service in China
Naturally, once the mechanical engineering is done, and if some special material are supposed to be used for manufacturing and prototyping, there is high chance those special material being expensive. You can not afford to take risk your prototyping people to fail making the part your need and this at expensive cost.
We keep an eye on all those people during prototyping process, so that you can peacefully focus your mind on preparing your sales and funding plan.
Why to perform electronic prototype assembly whil electronic product development in China
Once the mechanical engineering and engineering are done, and once all parts (pcba, metal, plastic and other parts) are done, then the full prototype has to be established.
Our solution to assembly prototype in China
We usually ensure a fast turn around and an effective follow up to perform rapid prorotyping of plastic parts. There are several possibility to realize plastic parts protoyping but the most used are CNC machining, SLA/ SLS, Vacum Casting, 3D Printing.
What do we do during prototype assembly in China
Our Mechanical Engineer will supervise rapid prototyping for plastic parts by coordinating and piloting our rapid prootyper partners, and will ensure quality control on those parts.
Your benefit using our plastic part prototyping service in China
Naturally, once the mechanical engineering is done, you will enjoy getting a piece of the plastic part that will fit into the enclosure of your product and with other parts and PCBA. You will enjoy the quick turnaround of our plastic part prototyping service.
The prototype can be use in several way: First it is a right way to perform testing, validate the engineering, it is perfect to establish a first reference design but it is also an opportunity to have a physical product that can be introduced for marketing purpose to potential client and investor before engaging fund in mould manufacturing and mass production.